Tensile structures

Onlinetensile structure configurator

Design your custom tensile structure online: upload a hand drawing of the plan, mark the masts and choose the fabric. You will instantly see the plan, axonometric view and elevations, with the main quantities. Our technical team receives your request and gets back to you with a proposal, with no obligation.

Before you start: see how it works

The video shows you step by step how to upload your drawing, mark the masts and send your request. In particular:

  • The scale is required: after uploading the drawing, mark two points of a known dimension and enter its real length.
  • Draw the masts as circles, guyed masts with two lines pointing outwards and wall fixings on a hatched wall.
Test mode. Email sending is not connected yet (CONFIG.ENDPOINT is empty): the request is not sent, only shown on screen.

Request sent

Thank you! We have emailed you a summary with the views of your tensile structure. A Maco Technology designer will get back to you at the address you provided.

?How to draw the plan

Drawing legend (click to close) 2,50 m 2,50 m 4,00 m 2,50 m 2,50 m 4,00 m wall Wall fixingsmall circle on a hatched wall ( /// ) Guyed mastcircle with two lines pointing outwards Fixed mastcircle or square, no lines Membranecurved line between the points 1 grid square on the sheet = 1 m
  • Draw with a dark pen on white paper, using a clearly visible line.
  • Squared (grid) paper is best: it helps you draw the structure in proportion (1 square = 1 m). If the drawing is not in proportion, the design will come out distorted.
  • Photograph the sheet from directly above, straight on, in even light and without shadows.
  • Write the length of each side outside the membrane, between one point and the next (in the example: 6 dimensions for 6 sides).
  • Scale required: after uploading, you must click the two ends of a known dimension (a written dimension or a number of grid squares) and enter the real length. Without a scale you cannot recognise the masts, place them or send your request: dimensions are not read automatically.
  • Guyed mast = circle with two lines pointing outwards (the two guy cables); fixed mast = circle or square with no lines; wall fixing = circle resting on a hatched wall. After recognition you can always correct the type of each mast.

1Your plan

Upload your hand-drawn plan
(drag it here or click – JPG / PNG)
Optional, but they help the recognition. “Fixing points” = all the support points in the drawing: masts (circles) and wall fixings. With more than one membrane, you will tick on each mast which membranes it is connected to.
After uploading you will need to set the scale (required): click two points of a known dimension on your drawing and enter the real length.

2Masts

Click on the plan to place a mast; drag it to move it. When you have finished, switch off “Add masts”.

3Membrane

A flat membrane is only allowed with the mesh.
The membrane edge starts to sag from the end of the tensioner: its length is set on each mast (guyed 0–50 cm, fixed 30–60 cm, wall fixings 30–200 cm, 0 if they are the ends of a side fully fixed to the wall).
If two consecutive wall fixings are the ends of one side, you can tick “Whole side fixed to the wall”: the edge becomes a straight line held by a continuous profile (no edge cable and no sag on that side).

4Your details

Disclaimer. The design produced here is purely indicative and valid for commercial purposes only. It is not a construction or execution design, and every element must be checked by qualified professionals. Maco Technology srl accepts no liability if it is used without the verification and approval of Maco Technology srl.

How the tensile structure configurator works

The configurator is Maco Technology’s tool for setting up a tensile structure design online: a shade sail or a tensioned membrane canopy stretched between masts and walls, for terraces, gardens, courtyards, outdoor dining areas and other outdoor spaces. In just a few minutes you go from a hand sketch to a complete first configuration to share with our technical team.

  1. Upload your plan drawing and set the scale using a known dimension.
  2. Mark the support points: fixed masts, guyed masts or wall fixings, with their heights.
  3. Choose fabric and colour and adjust the edge sag of the membrane.
  4. Check the plan, 3D axonometric view and elevations, with the membrane area and the main quantities.
  5. Send your request: you receive the summary by email and a designer gets back to you.

From configuration to tensile structure design

The online configuration is the first step. The actual tensile structure design – membrane form-finding, structural analysis of masts, cables and foundations, and detailing – is developed by our engineers starting from your request. Whether you need a custom shade sail for a terrace or a larger tensile canopy, you can design your tensile structure online first and then refine it with us.

Discover Maco solutions for tensile structures and shade sails and for tensile structures and large-span roofs, or browse our examples of completed tensile structures. Need to clad a building? Try the MACOskin textile facade configurator.

Frequently asked questions

How does the tensile structure configurator work?

You upload a hand-drawn sketch of the plan (a photo is fine), set the scale using a known dimension and mark the support points: fixed masts, guyed masts or wall fixings. Then you choose heights, fabric and colour. The configurator instantly draws the plan, axonometric view and elevations, together with the main quantities.

Do I need a technical drawing to use it?

No. A hand sketch of the plan with the main dimensions is all you need: the configurator recognises the masts and the membrane from your drawing. You can also start from the grid without uploading any drawing.

What do I receive after sending my request?

You receive an email summary of your tensile structure with the four views. A Maco Technology designer checks the configuration and gets back to you with a proposal and a quote.

Is the design produced by the configurator final?

No. The configurator is for setting up the project and making an initial estimate: dimensions, footings and diameters are indicative. The final design is developed by our technical team after a site survey and structural calculations.

What types of tensile structures can I configure?

Shade sails and tensioned canopies with one or more membranes, supported by fixed masts, guyed masts or wall fixings, including a whole side fixed to a wall. For more complex structures, such as large-span roofs or air-supported structures, contact us directly.

Have a special project? Contact our technical team.

Maco Technology srl · Via Ugo La Malfa 86/88 · 25050 Provaglio d'Iseo (BS), Italy · www.macotechnology.com